GRAINFATHER G30v3 MASH BREWERY

Introduction The Grainfather G30 v3 mash brewery is an electric all-in-one brewing system designed to simplify all-grain brewing at home. Constructed from high-quality 304 grade stainless steel with a 30 L capacity, the Grainfather G30 v3 lets you brew up to 23 L of finished beer per batch with reliable temperature control and easy clean-up. Whether you’re looking for a Grainfather G30 v3 mash brewery 30L setup or searching for a Grainfather G30v3 electric all-in-one brew system, this is a versatile solution for Australian homebrewers. Key Features 30 L 304 stainless steel vessel – durable, corrosion-resistant construction for years of brewing. Brews up to 23 L of beer per batch from grain. Electric dual-element heating – 500 W element for gentle heating and to reduce scorching, plus a 2,000 W element to ramp quickly to boil; auto-switches between elements. Rapid heat-up – heating from mash to boil can take as little as 20 minutes. Grainfather Connect Control Box & App – Bluetooth control, programmable step mashing, PID algorithm with triac for stable heating, delayed heating, waterproof graphic display and remote alerts. Integrated magnetic recirculation pump – 6 W, 1,800 RPM magnetic pump for continuous wort recirculation and sparge support; concealed under a stainless pump cover. Expandable stainless steel grain basket – brews with 4.5–9 kg grain; micro pipework available separately for grain bills below 4.5 kg. Counterflow wort chiller compatible – quick cooling so cooled wort can be pumped straight to a sterile fermenter; 23 L can be cooled in as little as 20 minutes. Product Details Material: 304 grade stainless steel. Vessel capacity: 30 L (brews up to 23 L finished beer). Heating elements: 500 W 2,000 W dual-element configuration. Pump: 6 W magnetic drive, 1,800 RPM with internal pump filter to prevent hops/grain ingress. Grain basket: Perforated, expandable (4.5–9 kg); basket lifting handle for draining and batch sparging. Accessories: Micro pipework (sold separately) for small grain bills; optional Sparge Water Heater available. Note: Grainfather Cleaner no longer comes with the unit; purchase separately if required. Brewing Information The Grainfather G30v3 electric brew system is ideal for all-grain brewing. Use the pump to recirculate wort through the grain bed for maximum efficiency and even mash temperatures. When sparging, lift the grain basket using the handle and rest its feet on the support ring at a 45° turn to allow draining while batch sparging over the top. The counterflow wort chiller connects between the Grainfather and a cold water source: hot wort is pumped through the inner copper coil while cold water flows opposite in the outer jacket, producing effective heat exchange. Expect cooled wort temperatures to be approximately 5°C above your tap water temperature, with 23 L cooled in around 20 minutes. The pump also cleans pipework by circulating detergent for quick cleaning. Grainfather Connect App & Control Box Bluetooth connection to your mobile device for remote control and alerts. PID control and triac for stable temperature management and programmable step mashing. Features: import BeerXML recipes, Grainfather Grain Kit recipes, set boil temp for altitude, unit selection (°C/°F), and calculators. iPhone/iPad: requires iPhone 4S or higher, iOS 8 or higher. Android: temporary version available; official app in development. Android requires Android 4.3 (API level 18) or higher with Bluetooth Low Energy (BLE). FAQ What is the batch size and vessel capacity? The Grainfather G30 v3 has a 30 L stainless steel vessel and is designed to produce up to 23 L of finished beer per brew. Can I control the Grainfather remotely? Yes — the Connect control box pairs via Bluetooth with the Grainfather Connect app for remote control, programmable step mashing, delayed heat and alerts. iOS support requires iOS 8 or higher; Android support requires BLE and an Android 4.3 device (temporary Android version availability may vary). How does the counterflow wort chiller work? The chiller pumps hot wort through an inner copper coil while cold water flows opposite through the outer jacket, rapidly cooling wort. Expect cooled wort to be roughly 5°C above tap water temperature; 23 L can be cooled in as little as 20 minutes. Is cleaning difficult? Cleaning is straightforward: the magnetic pump recirculates cleaning detergent through the pipework to speed the process. Note that Grainfather Cleaner is no longer included and should be purchased separately if needed.